Markoprint industrial inkjet coders are generally available in 1/2-inch increments of print. This applies to both HP and Funai based coders. These coders are very popular with packaging managers because of their versatility.

The X1Jet HP, X1Jet Stitch and iJet have on-board controllers, so an external controller is not required. These units have a small footprint and therefore can be installed on a wide range of packaging machinery or line conveyors. Integration of X1Jet and iJet are easily installed on high-speed feeders, form fill seal machines, egg cartoning lines, plastic web rolls, labelers and much more.

When more than one ½-inch print swath is required, the X2Jet, X4Jet and black box controllers are all good options. These controllers can operate with multiple ½-inch printers to create larger areas of print as required. The coders can be stacked together or placed separately on the line to code different portions of the box or packaging.

The X1Jet line also includes a Trident and Xaar alternative when one wider printhead is required. The X1Jet MX, for example, can print a 4-inch print area without stitching. These Markoprint USA print solutions have become quite robust over the past few years so manufacturers can trust the print quality in more harsh environments.

WYSIWYG software is included with all Markoprint USA products in the form of iDesign software for advanced message making. All common label formats and database connections are supported including linear and Datamatrix barcodes. iDesign is intuitive and requires no special training to operate.